Under 10 inches tall, this compact unit is capable of handling incredibly high precision while taking up minimal space.
The P 1000 is a snap to program and even easier to set up. With its simple user interface, you will find operating and programming the P 1000 to be simple and straight-forward.
All of our robots use the same core software but how you communicate with them is up to you. Whether you wish to use a language you are already familiar with such as G-code or if you require a custom designed solution such as feedback from exterior measuring devices, Mikrolar can write a custom interface to suit your needs such as feedback from an existing measuring device.
|Footprint||10.8" Dia.||275 mm Dia.|
|Net Weight||50 lbs||22.5 kg|
|Table||9.6" Dia.||243 mm Dia.|
|Footprint||48" x 36" x 12"|
|Net Weight||300 lbs||136 kg|
|Power Requirement||230 V 100 amps 3-phase|
|X,Y||2" Dia.||20.8 mm Dia.|
|Pitch and Roll||+/- 5 Degrees|
|Yaw||+/- 10 Degrees|
|Accuracy||+/- .0004"||10.2 microns|
|Max Feed Rate||120"/min.||50.8 mm/sec|